Monday, July 27, 2020

Offset in Wheels

Thinking of replacing your wheels?

Replacing your stock wheels can be a tricky process, and it is easy to make mistakes if you are not familiar with how wheels, and their fitment, work on different cars. Depending on the look you are going for, additional equipment may need to be added to the car - this would include spacers, lift or leveling kits, and more.

The way a vehicle is built, and the look you are going for is critical when it comes to the offset of the wheel. We will explain what this means - it is not as mysterious as it sounds!


O.E. Wheels

When you buy an O.E. wheel, it does not necessarily mean you are getting an actual factory wheel - in the aftermarket wheel world, O.E. refers to a wheel that is the same size and dimensions of the original equipment (O.E.), the diameter of the wheel, the width of the wheel and the offset are all identical to the original wheel that came on your car.

If the wheel you are looking at is an O.E. fitment, there will be no issues with the wheel working properly on your vehicle. It is when you are going for a more aggressive or sporty look that the offset of your wheel in important.

What is Offset?

The offset of a wheel is the number which describes the position of the hub mounting surface (see pic below) in relation to the width of the wheel. 

The hub mounting surface is the flat silver circle - this part of the wheel seats to the hub. 



This is measured in millimetres. If the hub mounting surface is exactly in the center of the wheel width, it has a 0 offset.

A positive offset is when the hub mounting surface is closer to the street side of the tire, so with an offset of +18, the hub mounting surface if 18 mm towards the street side of the wheel as measured against the center-line of the wheel.

A negative offset is when the mounting surface is closer to the back of the wheel, and is designated by a 'minus' sign, such as -12. As above it means that the mounting surface is 12 mm towards the inside of the rim from the rim's center-line.


Image Supplied by MSA Wheels - Maiden Tire & Wheel is an authorized
distributor for MSA Wheels



Get Professionals Involved

The offset of your upgrade wheels can be very important - a high negative offset pushed the wheel away from the interior of the car, while a positive offset pulls the wheel in tighter to the brakes and suspension. Both of these can cause problems. It is recommended that you do not deviate from the factory offset by more than 5 points in either direction. 

When you are pulling the wheel inwards, it may impact part of the suspension or hit the brake calipers, either of which can cause serious problems. A high negative offset that pushes the wheels further out can have negative impacts on handling, stability and could cause severe over-steering.

So if you are deviating from the factory specs get your local professionals involved - this will eliminate any potential problems.


Maiden Tire & Wheel has been supplying high quality automotive wheel and tire solutions for over a decade - for your tires and wheels in Maiden or any of the surrounding area, call us for solutions now!

Maiden Tire & Wheel
13 N Carolina Ave
Maiden, NC 28650
828-428-8681
www.maidentire.com





No comments:

Post a Comment